Paver Calculator

Estimate the number of pavers needed for an area.

Calculation example

Inputs:

Result:

Worked project example

A 16 ft × 12 ft patio is 192 sq ft. A 12 × 6 in paver covers 0.5 sq ft. With 5% cutting allowance: 192 ÷ 0.5 × 1.05 = 403.2, so the base order estimate is 404 pavers before rounding to full packs.

Formula

Pavers needed = project area ÷ paver area × (1 + waste percentage ÷ 100), rounded up.

How to use this calculator

Calculate the paved area and divide it by the face area of one paver. Multiply by 1 plus the selected waste percentage divided by 100, then round up to a whole paver. Use the actual face dimensions and compatible area units. This is a surface coverage estimate and does not calculate the excavation, base, bedding sand or edge restraints.

Before you calculate

Measure the project dimensions as accurately as practical and keep all measurements in compatible units. For material products, use the coverage, yield, density, or package size stated by the manufacturer or supplier rather than a generic assumption.

Choose the waste allowance based on the project shape, installation method, cutting requirements, and material characteristics. A simple rectangular estimate may need adjustment for openings, corners, slopes, joints, patterns, compaction, or other site conditions.

Understanding the result

The calculator provides a planning estimate based on the inputs shown above. It is not a substitute for project drawings, structural design, manufacturer instructions, or local requirements. Before ordering, compare the calculated quantity with the supplier's package sizes and ordering units.

Tips

  • Paver dimensions can be nominal. Confirm the manufacturer's actual dimensions and coverage per pack, including joint spacing if specified.
  • Herringbone, curves, borders, soldier courses and edge cuts can use more material than a simple rectangular running layout.
  • A paver surface needs a suitable base, bedding layer, drainage and edge restraint. Those quantities and design requirements are outside this calculator.

Frequently asked questions

How are pavers counted?

Area is converted to square inches, divided by paver area, increased by waste and rounded up.

Can patterns change the result?

Yes. Cuts and patterns can increase waste.

Does this estimate include the gravel base and bedding sand?

No. It estimates paver surface coverage only. Excavation, base aggregate, bedding material, jointing sand and edge restraints require separate calculations.

Why can the installed count be higher than the area calculation?

Cuts, borders, curves, pattern layout, breakage and pack sizes can increase the number required.

Related calculators

Browse all construction calculators

Use compatible units and verify estimates against project specifications, local requirements and manufacturer instructions.