Gravel Calculator
Calculate the volume of gravel required for an area.
Calculation example
Inputs:
Result:
Worked project example
A 20 ft × 10 ft driveway section with a 3 in layer uses 3 ÷ 12 = 0.25 ft depth. The geometric volume is 20 × 10 × 0.25 = 50 cu ft, equal to about 1.85 cu yd before supplier or compaction adjustments.
Formula
Volume = length × width × depth. The result is displayed in the selected measurement system.
How to use this calculator
Multiply the measured area length by width by the planned finished layer depth. Convert all three measurements to the same length unit before multiplying. To convert cubic feet to cubic yards, divide by 27. For multiple areas or different layer depths, calculate each separately and add the volumes.
Before you calculate
Measure the project dimensions as accurately as practical and keep all measurements in compatible units. For material products, use the coverage, yield, density, or package size stated by the manufacturer or supplier rather than a generic assumption.
Choose the waste allowance based on the project shape, installation method, cutting requirements, and material characteristics. A simple rectangular estimate may need adjustment for openings, corners, slopes, joints, patterns, compaction, or other site conditions.
Understanding the result
The calculator provides a planning estimate based on the inputs shown above. It is not a substitute for project drawings, structural design, manufacturer instructions, or local requirements. Before ordering, compare the calculated quantity with the supplier's package sizes and ordering units.
Tips
- Decide whether the specified depth is the loose delivered depth or the compacted finished depth. They are not interchangeable.
- Gravel type, particle size, moisture and compaction change bulk density. If ordering by weight, ask the supplier for the density or conversion used for that exact product.
- For a sloped or irregular area, divide the site into smaller sections and measure representative depths rather than assuming one uniform layer.
Frequently asked questions
How much gravel do I need for a 20 ft by 10 ft area at 3 inches deep?
The geometric volume is 20 × 10 × 0.25 = 50 cubic feet. Divide by 27 cubic feet per cubic yard for about 1.85 cubic yards, before any supplier-specific allowance for compaction, settling or uneven ground.
How do I convert cubic feet of gravel to cubic yards?
Divide cubic feet by 27. For example, 50 cubic feet ÷ 27 is about 1.85 cubic yards.
Does this estimate include compaction or convert to tons?
No. It reports geometric volume only. Ask the supplier whether to order loose or compacted material. To estimate tons, use the bulk density for the exact gravel and conditions from the supplier; it varies by material and moisture.
How deep should a gravel layer be?
The required depth depends on the use, base preparation, aggregate and site conditions. Follow the project specification or supplier and installer guidance rather than using a universal depth.
Related calculators
Use compatible units and verify estimates against project specifications, local requirements and manufacturer instructions.