Paint Calculator
Estimate paint required from wall area, coverage and coats.
Calculation example
Inputs:
Result:
Worked project example
For 600 sq ft of paintable wall area, product coverage of 350 sq ft per gallon and two coats: 600 ÷ 350 × 2 = 3.43 gallons. If the product is sold in one-gallon containers, plan on at least 4 gallons, subject to the surface and application method.
Formula
Paint quantity = wall area ÷ coverage per unit × number of coats.
How to use this calculator
Add the wall or ceiling areas to be painted, subtract large openings if you have measured them, then divide the paintable area by the coverage rate on the product label. Multiply by the number of coats. The result is the estimated volume or number of coverage units, depending on the units entered.
Before you calculate
Measure the project dimensions as accurately as practical and keep all measurements in compatible units. For material products, use the coverage, yield, density, or package size stated by the manufacturer or supplier rather than a generic assumption.
Choose the waste allowance based on the project shape, installation method, cutting requirements, and material characteristics. A simple rectangular estimate may need adjustment for openings, corners, slopes, joints, patterns, compaction, or other site conditions.
Understanding the result
The calculator provides a planning estimate based on the inputs shown above. It is not a substitute for project drawings, structural design, manufacturer instructions, or local requirements. Before ordering, compare the calculated quantity with the supplier's package sizes and ordering units.
Tips
- Use the coverage rate for the exact paint, primer and surface condition. Label coverage is usually a guide, not a guarantee.
- New drywall, bare plaster, porous masonry, dark color changes and textured surfaces may need primer or additional coats. Follow the coating manufacturer's system recommendations.
- Measure each wall separately where heights differ. Include ceilings, trim or doors only if you intend to use the same product on them.
Frequently asked questions
How is paint quantity estimated?
Wall area is divided by coverage per unit and multiplied by coats.
Why can actual use differ?
Coverage varies with product and surface conditions.
Should I subtract windows and doors?
Subtract openings when you have measured them and they will not be painted with the same product. Include reveals, trim or other surfaces only when applicable.
Does the calculator round up to whole cans?
The calculation estimates coverage units. Compare the result with the available container sizes and round up to a purchasable combination.
Related calculators
Use compatible units and verify estimates against project specifications, local requirements and manufacturer instructions.